Harbor Freight Tech 2 Diagnostic Cart Boom Kit (No Drilling Required)
The one thing I always hate is drilling into stuff, but sometimes it must be done. My first diagnostic cart was a Harbor Freight Tech 2 and has tons of holes in it, while it’s retired at home in my workshop. I decided to give it a facelift without drilling. This diagnostic cart boom requires no drilling, attaches to the corner where the carriage bolts are. Comes with one mount and a stabilizer - the stabilizer goes in the middle section and allows for a longer pipe and a pivot point, corner trim piece, lead holder, amp clamp holder and end cap.
Small details
-lead and amp clamp holder portion have brass inserts where you can add 4mm banana posts for storage
Be sure to check out the add ons! I offer a remote BNC box that can attach to the bottom of the lead holder (this extends the main BNC ports further out for more reach during diagnostics, it also places the BNCs right behind where you hang the leads which leads to, less tangles, less stress not he BNC ports - (these ports face straight down unlike other vendors where they stick straight out and apply more stress to the cable)
I also offer 2 add ons directly for the corner piece that you can place up to 4 extra BNC ports or 4mm banana jacks. Perfect if you have an extra scope you want hooked up! (Coming Soon as an add on)
Includes all 3D printed parts and Hardware. The only thing you need to go get from the store is 1/2 pipe and one elbow (I do this to keep down on shipping costs)
The one thing I always hate is drilling into stuff, but sometimes it must be done. My first diagnostic cart was a Harbor Freight Tech 2 and has tons of holes in it, while it’s retired at home in my workshop. I decided to give it a facelift without drilling. This diagnostic cart boom requires no drilling, attaches to the corner where the carriage bolts are. Comes with one mount and a stabilizer - the stabilizer goes in the middle section and allows for a longer pipe and a pivot point, corner trim piece, lead holder, amp clamp holder and end cap.
Small details
-lead and amp clamp holder portion have brass inserts where you can add 4mm banana posts for storage
Be sure to check out the add ons! I offer a remote BNC box that can attach to the bottom of the lead holder (this extends the main BNC ports further out for more reach during diagnostics, it also places the BNCs right behind where you hang the leads which leads to, less tangles, less stress not he BNC ports - (these ports face straight down unlike other vendors where they stick straight out and apply more stress to the cable)
I also offer 2 add ons directly for the corner piece that you can place up to 4 extra BNC ports or 4mm banana jacks. Perfect if you have an extra scope you want hooked up! (Coming Soon as an add on)
Includes all 3D printed parts and Hardware. The only thing you need to go get from the store is 1/2 pipe and one elbow (I do this to keep down on shipping costs)
The one thing I always hate is drilling into stuff, but sometimes it must be done. My first diagnostic cart was a Harbor Freight Tech 2 and has tons of holes in it, while it’s retired at home in my workshop. I decided to give it a facelift without drilling. This diagnostic cart boom requires no drilling, attaches to the corner where the carriage bolts are. Comes with one mount and a stabilizer - the stabilizer goes in the middle section and allows for a longer pipe and a pivot point, corner trim piece, lead holder, amp clamp holder and end cap.
Small details
-lead and amp clamp holder portion have brass inserts where you can add 4mm banana posts for storage
Be sure to check out the add ons! I offer a remote BNC box that can attach to the bottom of the lead holder (this extends the main BNC ports further out for more reach during diagnostics, it also places the BNCs right behind where you hang the leads which leads to, less tangles, less stress not he BNC ports - (these ports face straight down unlike other vendors where they stick straight out and apply more stress to the cable)
I also offer 2 add ons directly for the corner piece that you can place up to 4 extra BNC ports or 4mm banana jacks. Perfect if you have an extra scope you want hooked up! (Coming Soon as an add on)
Includes all 3D printed parts and Hardware. The only thing you need to go get from the store is 1/2 pipe and one elbow (I do this to keep down on shipping costs)
Mount sizing
Large standard mount is 150x150mm and is great for a slide top when nothing sticks out too far to interfere with the pipe. The small mount is 100x60mm and was made for the harbor freight tech2 cart to mount on the upper side area. The pipe is offset more to clear the lid if closed
Please double and triple check measurements with me if you are unsure!
Copyright information:
Patent pending. All designs and products are copyright of Drail Diagnostics LLC. Any attempt at reproducting or copying product and or designs to sell will result in legal action.
