Universal Diagnostic Cart Boom Kit (Magnetic)
One of the best decisions I ever made in my diagnostic process was honestly staying organized, most importantly with my scope leads. Having your leads out of the drawer and hanging leads to quicker acquisition times and keeping scope leads tangle free. Because of this I created the first 3D printed diagnostic cart boom kit. This universal boom kit is the magnetic version of my original bolt on boom. Includes everything from before but has a stablizer mount and magnets. For the lead holder it comes in 4 seperate sections that clamp to the pipe. On one side are slots to hold leads and the other end you can hang an amp clamps or anything else you can think of. The bottom side of the lead portion has two cut outs so if you decide to upgrade to the added BNC box. you can without any additional parts.
Includes:
Lead Holder
Amp Clamp Holder
Large Mount
Stabilizer
End Clamp
Nuts and Bolts
Magnets for the mount and stabilizer
Memory Lock
Corner Trim Module
*If you want to mount your picoscope or autel ultra scope to the boom mount please check out the mount upgrade. This will allow you to magnetically attach a Picoscope (with one of my pico 4425/4425A cases or a Autel Ultra VCMI Clasp.
*Don't forget to add the BNC box if you want!
One of the best decisions I ever made in my diagnostic process was honestly staying organized, most importantly with my scope leads. Having your leads out of the drawer and hanging leads to quicker acquisition times and keeping scope leads tangle free. Because of this I created the first 3D printed diagnostic cart boom kit. This universal boom kit is the magnetic version of my original bolt on boom. Includes everything from before but has a stablizer mount and magnets. For the lead holder it comes in 4 seperate sections that clamp to the pipe. On one side are slots to hold leads and the other end you can hang an amp clamps or anything else you can think of. The bottom side of the lead portion has two cut outs so if you decide to upgrade to the added BNC box. you can without any additional parts.
Includes:
Lead Holder
Amp Clamp Holder
Large Mount
Stabilizer
End Clamp
Nuts and Bolts
Magnets for the mount and stabilizer
Memory Lock
Corner Trim Module
*If you want to mount your picoscope or autel ultra scope to the boom mount please check out the mount upgrade. This will allow you to magnetically attach a Picoscope (with one of my pico 4425/4425A cases or a Autel Ultra VCMI Clasp.
*Don't forget to add the BNC box if you want!
One of the best decisions I ever made in my diagnostic process was honestly staying organized, most importantly with my scope leads. Having your leads out of the drawer and hanging leads to quicker acquisition times and keeping scope leads tangle free. Because of this I created the first 3D printed diagnostic cart boom kit. This universal boom kit is the magnetic version of my original bolt on boom. Includes everything from before but has a stablizer mount and magnets. For the lead holder it comes in 4 seperate sections that clamp to the pipe. On one side are slots to hold leads and the other end you can hang an amp clamps or anything else you can think of. The bottom side of the lead portion has two cut outs so if you decide to upgrade to the added BNC box. you can without any additional parts.
Includes:
Lead Holder
Amp Clamp Holder
Large Mount
Stabilizer
End Clamp
Nuts and Bolts
Magnets for the mount and stabilizer
Memory Lock
Corner Trim Module
*If you want to mount your picoscope or autel ultra scope to the boom mount please check out the mount upgrade. This will allow you to magnetically attach a Picoscope (with one of my pico 4425/4425A cases or a Autel Ultra VCMI Clasp.
*Don't forget to add the BNC box if you want!
Mount sizing
Large standard mount is 150x150mm
DISCLAIMER: Although the magnets are very very strong keep in mind it is still not a permanent fixture. Each magnet is rated at 65lb pull force (you have 3 of these - 2 in the main mount and 1 in the stablizer). Sliding force will vary depending on how clean or smooth the surface is. As far as the main vertical pole of the boom I would suggest getting a pole 48inches long or more to space out the stabilizer. Not only does this spread out the surface area of where the magnets are but also gives you a grip area when moving your cart around
Copyright information:
Patent pending. All designs and products are copyright of Drail Diagnostics LLC. Any attempt at reproducting or copying product and or designs to sell will result in legal action.
